NiceHCK HB2 Review – Nice, As Per Namesake!

Pros

Comfortable, light, good build.
Neutralish sound – doesn’t colour frequencies, and potrays the connected IEM as it is.
Excellent sound quality.
Good battery life.
Modular system to allow MMCX and 2 pin options for IEMs.
Strong and easy BT connectivity and range. No dropouts for BT.
Has a mic to take calls.
Volume controller.

Cons:

No LDAC or aptX LL/HD
No charging case.
Hisses with highly sensitive IEMs.
No water proofing.

EXECUTIVE SUMMARY

The NiceHCK HB2 is a bluetooth wireless adapter that has a modular MMCX/2 pin connector, this increases pairing options for detachable IEMs. It has great sound quality, good battery life and excellent connectivity.

SPECIFICATIONS

• Bluetooth version: Bluetooth 5.2 (Qualcomm QCC3040)
• Bluetooth coding: SBC, AAC, aptX
• Wireless range: 10 meters
• SNR: 59 dB
• Playtime: 13 hours
• Charging time: 1.5 hours
• Tested at $79 USD

ACCESSORIES

In addition to the BT adapter, it comes with:

1) Modular MMCX, 0.78mm 2 Pin and NX7 2 Pin types.

• This is the selling point of the NiceHCK HB2! It comes with a unique 3 types of detachable modules, where one can disconnect the module from the BT adapter, so one can use various IEM connector type housing with it – MMCX, 0.78mm 2 Pin and NX7 2 Pin types.
• The modular design is also good in that usually the connector area is the first point to fail after repeated wear and tear, so no biggie buying the detachable modules, rather than replacing the entire device.

2) USB-C charging cable

BUILD/COMFORT

The NiceHCK HB2 is very comfortable, light and ergonomic. I’ve even used it for 10 hour sessions and forgot it’s in use. The wire guides are flexible and they don’t impinge on the ears, even with a mask and spectacles on. The build quality is rather sturdy too.

The NiceHCK HB2 has no waterproofing mentioned in the specs unfortunately. But FWIW, I’ve used it in some slightly rainy conditions and even with gym and exercise for the past 3 weeks and there are no issues thus far, fingers crossed.

FUNCTION/CONNECTIVITY

Holding a long press on the back of the device turns it on. The left and right sides pair up automatically when turned on, and I had no issues with pairing it with multiple BT devices, all devices recognized the NiceHCK HB2 on the spot. Pressing the power button for 5 seconds conversely turns it off.

The buttons for the NiceHCK HB2 work as advertised:

Interestingly, only one side of the NiceHCK HB2 can be used independently without the need to turn on the other side. This can be an option for some who only want one side in the ear for calls, or say if the other side is being charged. One thing to nitpick is that the buttons are quite sensitive, and are located at the rear of the device, so they can be accidentally touched sometimes.

The NiceHCK HB2 has a mic and can take calls, with good sound quality for calls. I’ve tried it on a few online meetings with no complaints from the others in the conferences with regards to voice quality.

I also liked the volume controller on the NiceHCK HB2. In contrast, some BT adapters like the iBasso CF01 have no volume control on it, so if say one is far away from the BT device used to pair with it, one has to physically go over to the device to change the volume, unlike the NiceHCK HB2, which just requires a tap on the housing.

Connectivity is excellent on the NiceHCK HB2, I have not a single drop out whatsoever in the past 3 weeks that I’ve been using them. The BT range is about 10 meters or so, assuming no walls/obstructions are in the path.

The NiceHCK HB2 doesn’t come with a charging case unfortunately, but it takes around 1.5 hours to reach a full charge. Battery life is advertised at 13 hours, I think it is thereabouts ballpark from my testing, but as per most BT/wireless devices, that is expected to go down with repeated charging cycles, and it also depends on the volume one listens at and perhaps the file type (lossless versus lossy).

TECHNICAL ASPECTS

The NiceHCK HB2 uses the Qualcomm QCC3040 TWS chipset. It has BT 5.2 with support for aptX, SBC and AAC, but unfortunately doesn’t support LDAC or aptX LL/HD.

For the purposes of this review, I paired the NiceHCK HB2 with a range of 15 IEMs. From more power hungry sets like the TRI I3 (contains planars) and the KBEAR BElieve (low sensitivity beryllium driver), to some fussier low impedance/high sensitivity multi driver sets like the Audiosense T800 and TRI Starsea.

Pairings:

• Audiosense T800
• BLON BL-03
• BLON Cardinal
• iBasso CF01
• KBEAR BElieve
• Kinera BD005 Pro
• LZ A7
• Oriveti New Primacy
• Tanchjim Oxygen
• TFZ Tequila
• TRI I3
• TRI Starsea
• Westone 3 (MMCX modded)
• Westone W30
• Whizzer HE01

This device packs quite a lot of juice, and it could power the KBEAR BElieve and TRI I3 with headroom to spare. One thing I would have to nitpick, is that there is some hiss noted with high sensitivity type multi BA IEMs like those mentioned above.

One can mitigate the hiss to some extent by lowering the volume on the NiceHCK HB2, and just jacking up the volume from the BT device you are connected to. Generally the hiss also is not perceived when one is outdoors or when music starts playing anyway.

Dynamics are good on the NiceHCK HB2, there isn’t much loss of the subbass, which is a common occurance in TWS/BT sets. There is some loss of the higher treble, but when one uses BT and wireless stuff on the go and outside,

I think it is quite hard to really notice this. I really liked that the NiceHCK HB2 doesn’t colour the sound much, it just faithfully transmits the sound signature of the attached IEM. So far of the IEMs I’ve paired with it, they all sound the same in terms of general FR as the wired version of these IEMs, though of course wired gear in general tends to have better dynamics, microdetails and technical performance.

COMPARISONS

Even among wireless gear, I generally prefer BT adapters (like the TRN BT20S and TRN BT20), rather than TWS stuff, as I’d like to use my favourite detachable IEMs (with famililar sound signatures) on the go, and hence these BT adapters allow me to reuse the IEM. Plus I think that TWS buds are limited sooner or later by the BT tech or battery life (with repeat charges), so at least the IEM can be kept even if the TWS bud dies/gets outdated.

I’ve the TRN BT20 and TRN BT20S and the iBasso CF01 for these BT adapters. The NiceHCK HB2 sound better than these 3 in terms of sound quality/dynamics and also in terms of connectivity. The iBasso CF01 is more expensive, but comes with a charging case.

I’ve had a few drop outs with the iBasso CF01s and there is a shorter connection distance than the NiceHCK HB2. The iBasso CF01 also only features a MMCX non detachable connector, so that limits the IEM types that can be used with it. The iBasso CF01 has no volume controller as mentioned prior.

CONCLUSIONS

The NiceHCK HB2 is a bluetooth wireless adapter that has a modular MMCX/2 pin connector, this increases pairing options for detachable IEMs. It has great sound quality, good battery life and excellent connectivity.

If a charging case was added, this BT adapter would have been perfect, but as it is, I would recommend this set for those that want the convenience of a wireless connection on the go!

Contact us!

You find an INDEX of all our earphone reviews HERE.

DISCLAIMER

I bought the NiceHCK HB2 with a discount from the NiceHCK Aliexpress shop: https://www.aliexpress.com/item/1005002848089532.html.

Our generic standard disclaimer.

You find an INDEX of our most relevant technical articles HERE.